SYNERINGS®

 

The Synering® system is an advanced sealing concept designed to meet extreme demands regarding temperature, medium, etc. which cannot be covered by conventional sealing compounds (like elastomers, PUR, fabric materials, etc.)
PTFE is hardly elastic. Therefore, PTFE sealing elements have to be combined with an elastic component, usually an O-ring. Synerings® consist of a PTFE part, made of a specially modified compound, and an energizing spring (standard: stainless steel). So, the outstanding thermal and chemical properties of PTFE can be used to full advantage.

NewDealSeals supplies a wide range of spring-energized seals as an economic alternative to for instance Balseal®, Flexiseal®, Omniseal® and Variseal®.

HOW DOES THE SYNERING® WORK?

The Synering® is compressed radially resp. axially when installed in the seal gland. The resilient spring responds with constant force, pushing out the sealing lips. As system pressure is applied, the seal is additionally energized, increasing the sealing force.

In dynamic applications, the spring expands, compensating for seal wear while continuing to provide load. In conditions that see thermal cycling, the spring continues to energize the seal lips without taking a compression set or becoming too soft or too hard

 

TECHNICAL  SPECIFICATIONS

OPERATING TEMPERATURES

Synerings® with V-spring: -150 to + 225°C

Synerings® with O-spring: -150 to + 260°C

OPERATION VELOCITIES

Synerings® with V-spring

Reciprocating: 15-20 m/s

Helical and rotating: ≤ 4 m/s

Synerings® with O-spring

Reciprocating: 15-20 m/s

Helical and rotating: ≤ 4 m/s

PRESSURE LIMITS

Synerings® with V-spring: ≤ 350 bar

Synerings® with O-spring: ≤ 800 bar

PROFILES

PROFILE S1

Rotating

The profile S1 consists of a PTFE sealing ring with a V-spring. The profile S1 is appropriate for rotating applications as an alternative to an O-ring in situations where sealing performance and friction have to be optimized.

PROFILE S2

Dynamic rod sealing

The profile S2 consists of a PTFE sealing ring with a V-spring. The profile S2 is appropriate for dynamic rod sealing applications as an alternative to an O-ring in situations where sealing performance and friction have to be optimized.

PROFILE S3

Dynamic piston sealing

The profile S3 consists of a PTFE sealing ring with a V-spring. The profile S3 is appropriate for dynamic piston sealing applications as an alternative to an O-ring in situations where sealing performance and friction have to be optimized.

PROFILE S4

Static inside sealing

The profile S4 consists of a PTFE sealing ring with an O-spring. The profile S4 is appropriate for static inside sealing applications as an alternative to an O-ring in situations where sealing performance has to be optimized.

PROFILE S5

Static outside sealing

The profile S5 consists of a PTFE sealing ring with an O-spring. The profile S5 is appropriate for static outside sealing applications as an alternative to an O-ring in situations where sealing performance has to be optimized.

PROFILE S6

Flange sealing: internal pressure

The profile S6 consists of a PTFE sealing ring with an O-spring. The profile S6 is appropriate for flange sealing applications with internal pressure as an alternative to an O-ring in situations where sealing performance has to be optimized.

PROFILE S7

Flange sealing: external pressure

The profile S7 consists of a PTFE sealing ring with an O-spring. The profile S7 is appropriate for flange sealing applications with external pressure as an alternative to an O-ring in situations where sealing performance has to be optimized.

PTFE COMPOUNDS

Color Temperature Application Information
NDS-100
PTFE-virgin
White -190 to +230 °C Chemical Industry, Food Industry High chemical resistance
Datasheet
NDS-123
PTFE +15% glass, +5% molybdenum disulfide
Grey -190 to +290 °C Medium-duty

High chemical resistance, High creep resistance, Electrical properties like virgin PTFE

 

NDS-225
PTFE +25% carbon
Black -190 to +315 °C Pneumatics Rotary sealing High wear and creep resistance
Datasheet
NDS-235
PTFE +10% carbon fibre
Black -260 to +310 °C Water hydraulics, Seawater, Short strokes with high frequency Very good wear properties
Datasheet
NDS-415
PTFE +15% graphite
Antrachite -190 to +230 °C Low mechanical stress, Soft sealing Surfaces Chemical resistance
NDS-555
PTFE + mineral fibers
Antrachite -200 to +260 °C Medium and heavy mechanical stress, Hydraulic applications Chemical, wear and creep resistance
Datasheet
NDS-640
PTFE +40% bronze
Bronze -156 to +260 °C Medium and heavy mechanical stress, Hydraulic applications

Outstanding wear and creep resistance
Datasheet

NDS-660
PTFE +60% bronze
Bronze -156 to +260 °C Heavy mechanical stress, Hydraulic applications Outstanding wear and creep resistance
NDS-750
PTFE + polyimide
Tan -260 to +310 °C High speed rotating applications Use against soft metals

Related PTFE Seals

Back-up Rings

Back-up rings are used for static and dynamic applications in connection with O-rings, to prevent extrusion of the O-ring into the diametrical clearance.

Back-up Rings ►

Rotary Seals

Rotary seals are used in applications with oscillating or rotating movements in order to retain liquid lubricants and to prevent the penetration of dirt and water.

Rotary seals ►

Rod Seals

The Rod Seal consists of a single-acting PTFE rod sealing ring and an O-ring. They are combined as a single unit and are appropriate for rods and plungers in hydraulic cylinders.

Rod seals ►

 

CONTACT  FORM

    

We believe in the quality of our products and service. Fill out the form on the right-hand side and we will contact you shortly. Or you can use our product request form here.

NewDealSeals B.V.

+31 (0) 226 362 233

info@newdealseals.com

Boezemschop 8, Breekland, 1724 BJ Oudkarspel, The Netherlands