Metallic Seals

Metallic seals are designed to make a seal by means of a ‘first line contact’ or ‘wedge action’ between the counter face (e.g. a flange) and the packing. The pressure on the sealing surface, exerted by the bolts, causes the ‘softer’ metal of the packing to flow into the microscopic structure of the harder flange material, thus creating an extremely strong and efficient seal.

Metallic seals are either made of one single metal or a combination of metals. In order to guarantee a proper, reliable seal, it is crucial to make the right choice of profiles and material.

Products

Bonded Seals | Dowty Washers

Bonded seals are static seals that are used to seal bolt heads, nuts and screw and flange connections.

Bonded Seals | Dowty Washers ►

Metal Sealing Rings

Metallic seals are designed to make a seal by means of a ‘first line contact’ between the counter face and the packing.

 

Metallic Materials

NewDealSeals supplies metallic seals in more than 100 different materials. To simplify assembly, or to improve the sealing properties, the surfaces of our seals can be given various finishes, such as bronze, chromium, Dacromet®, eloxal, phosphated, gold, copper, brass, nickel, tin, wax, silver or zinc.

NewDealSeals metallic seals are available in accordance with various standards (e.g. DIN7603, 2690, 2691, 2697, EN837-2). The metallic materials are subdivided into the following metal types:

  • Aluminium
  • Armco
  • Bronze
  • Hastelloy®
  • Inconel
  • Copper
  • Lead
  • Brass
  • Monel
  • Nickel
  • Steel (SS, spring steel)
  • Silver
  • Zinc

Contact Expert 

 

 

CLIENT CASES

With more than 25 years experiance in the sealing industry our engineering deparment is ready for your sealing challange. Below you can find a small range of our engineering expertises/services. ► Knowlegde of all sealing types ► FEM analysis capabilitys ► 3D design department ► Material laboratory ► Prototype machining equipment ► 3D ”rubber” printing options ► Custom made reverse engineering equipment       

1. PERFECT SEALING SURFACE

One of our customers had a sealing issue with an existing product. Reason for failure were very small marks on the sealing surface.

2. O-Rings Class A+

Normally an O-Ring will create a block and seals. For this specific application a controlled leakage was mandatory and standard O-Rings failed due to the existing tolerances.

3. Oil Reduction Rod Seal Improvement

One of our customers had a sealing issue with an existing rod seal. Reason for failure was unknown but oil leakage was considered to be too high.

4. One piece Oil Seal Design

During this operation you need at least two people to install the seal. Also leakage can occur and parts can damage each other during installation. For these reasons our client requested us to find a solution.

Contact Us

We believe in the quality of our products and service. Fill out the form and one of our skilled engineers will contact you within the next business day.

Contact details

  •  +31 (0) 226 362 233
  •  info@newdealseals.com
  •  Energiestraat 2-5, 1749DN Warmenhuizen, Nederland

1 + 4 =